Details
Hotend v9 complete for 2.9mm filament with 0,50mm nozzle
NOTE THIS IS PRE-ORDER: 2-4weeks lead time !
This will be v9c or v10.. unsure atm but both work great ;)
v10 is almost the same as v9, but it is easier to produce/assemble / change core distance / finetune etc. It,also heats up faster, it can be set at lower temps (the issue from v9a that needs 230 minimum) But v10 main goal was faster extrusion and it it is faster then v9, lots faster...
27-2: From now on the long drill for the hotend is included in this kit
27-2: From now on the plugnplay heater set is included in this kit,
This fits on a Mendel (with standard carriage) or on an Orca 0.2 & 030 & 040.
This hotend kit is all-inclusive, so you only need a motor to make a complete extruder incl hotend.
No more silicon sealant and kapton tape is needed, due to plugnplay heater set.
NOTE THIS IS PRE-ORDER: 2-4weeks lead time !
This will be v9c or v10.. unsure atm but both work great ;)
v10 is almost the same as v9, but it is easier to produce/assemble / change core distance / finetune etc. It,also heats up faster, it can be set at lower temps (the issue from v9a that needs 230 minimum) But v10 main goal was faster extrusion and it it is faster then v9, lots faster...
27-2: From now on the long drill for the hotend is included in this kit
27-2: From now on the plugnplay heater set is included in this kit,
This fits on a Mendel (with standard carriage) or on an Orca 0.2 & 030 & 040.
This hotend kit is all-inclusive, so you only need a motor to make a complete extruder incl hotend.
No more silicon sealant and kapton tape is needed, due to plugnplay heater set.