Details
Complete Orca v0.2 Kit (Unassembled)
This is a full kit to make a fully working 3D printer incl heated bed for PLA and ABS and for now we have decided that the first serie will come with 1.75mm optimized extruder and hotend v9 for 1.75mm.
print size is around 200x200x130mm for Orca v0.2 incl v9 hotend.
(ps. for the picture is quickly grabbed an Orca from the production line and made some quick pictures.. so it has been used and is uncleaned etc.. actually this one has printed over 12 weeks now.)
This is a complete full kit, incl things like kapton tape, power supply for PLA & ABS heated bed etc etc.
It will be version 0.2 (videos is v0.1). we will post all specs/info/updates/future plans soon.
note: Orca v0.2 comes with Gen6 Electronics for now, our new (Orca) touchscreen electronics is still in development, check calendar or blog for latest info/status.
RepRap Orca wiki page
BOM:
Bearing kit (40x 624 & 4x 608)
Belts (3x840mm)
Threaded Rod, 2x 265mm, 6x 330mm, 5x 400mm, 2x 500mm,
Smooth Rod, 2x 400mm, 4x 330mm
Bolts,nuts, washers for Orca v0.2 (big bag)
Motor set (four motors including molex)
Orca v0.2 Plastic set including extruder plastics
Silicon sealant upto 300C - 75ml
Kapton tape
Power supply 70W 12-24V (for Gen6)
Power supply 90W 12-22V (for heated bed)
USB cable A - B, 3mtr length
1-2 mtr PLA filament sample for first extrusion tests
Orca v0.2 Thick and thin sheet (1,3 & 4mm Aluminium and 6mm POM, check thick and thin sheet category for a picture)
Generation 6 Electronics (including three optos on cables and high temp cable for extruder & green power connector)
General bag with: 100 cable-ties, 3x motor belt pullies, set-screws (4x6), scratch-felt feet.
Heated bed bag: 4x 1R5 heaterblock, 4x spring 26x11, PTFE sheet, cabling for soldering between heaterblocks
Extruder bag: complete hotend v9, cooling fan 40x40, cabling for extending cooling fan, brass insert piece (5,1mm ID), four extruder springs (28x9), Thermistor G550, Heat resistor, 10x ferrules 0,5mm and 10x 1,0mm, hightemp heatshrink tube, 18mmx4mm axle.
This is a full kit to make a fully working 3D printer incl heated bed for PLA and ABS and for now we have decided that the first serie will come with 1.75mm optimized extruder and hotend v9 for 1.75mm.
print size is around 200x200x130mm for Orca v0.2 incl v9 hotend.
(ps. for the picture is quickly grabbed an Orca from the production line and made some quick pictures.. so it has been used and is uncleaned etc.. actually this one has printed over 12 weeks now.)
This is a complete full kit, incl things like kapton tape, power supply for PLA & ABS heated bed etc etc.
It will be version 0.2 (videos is v0.1). we will post all specs/info/updates/future plans soon.
note: Orca v0.2 comes with Gen6 Electronics for now, our new (Orca) touchscreen electronics is still in development, check calendar or blog for latest info/status.
RepRap Orca wiki page
BOM:
Bearing kit (40x 624 & 4x 608)
Belts (3x840mm)
Threaded Rod, 2x 265mm, 6x 330mm, 5x 400mm, 2x 500mm,
Smooth Rod, 2x 400mm, 4x 330mm
Bolts,nuts, washers for Orca v0.2 (big bag)
Motor set (four motors including molex)
Orca v0.2 Plastic set including extruder plastics
Silicon sealant upto 300C - 75ml
Kapton tape
Power supply 70W 12-24V (for Gen6)
Power supply 90W 12-22V (for heated bed)
USB cable A - B, 3mtr length
1-2 mtr PLA filament sample for first extrusion tests
Orca v0.2 Thick and thin sheet (1,3 & 4mm Aluminium and 6mm POM, check thick and thin sheet category for a picture)
Generation 6 Electronics (including three optos on cables and high temp cable for extruder & green power connector)
General bag with: 100 cable-ties, 3x motor belt pullies, set-screws (4x6), scratch-felt feet.
Heated bed bag: 4x 1R5 heaterblock, 4x spring 26x11, PTFE sheet, cabling for soldering between heaterblocks
Extruder bag: complete hotend v9, cooling fan 40x40, cabling for extending cooling fan, brass insert piece (5,1mm ID), four extruder springs (28x9), Thermistor G550, Heat resistor, 10x ferrules 0,5mm and 10x 1,0mm, hightemp heatshrink tube, 18mmx4mm axle.